This is what we do best...

Reglazing. Refinishing. Resurfacing.

Reglazing, refinishing and resurfacing are terms that are now used to mean the same thing. By applying substances to the surface of an already installed fixture, a new surface can be obtained that is an improvement over the original one that may be dull, discolored and/or worn out from age or abuse. All the work is done on-site.

By reglazing, you can avoid replacement of the fixture and its useful life can be extended considerably AND it’s easy to clean.

Bathtub refinihsing, Tile refinihsing, Sink refinihsing

Fiberglass Reglazing, Refinishing

Fiberglass feels and sounds like hollow “plastic” when you knock on it. It is a composite of several different materials cast in a single piece. It is versatile and can be used for many different shapes and sizes.

tub Reglazing, Tile Reglazing, Sink Reglazing

Porcelain Refinishing

Porcelain feels hard and cold to the touch and, when you knock on it, it sounds like it is a heavy, thick metal under the usually white finish.

Bath Reglazing, Tile Reglazing, Sink Reglazing

Pressed Steel Reglazing

This fixture material feels cold to the touch. The sound when knocking on it indicates a somewhat thin, hard, hollow metal. The name is from the structural black metallic material that is used to make the form of the fixture by putting a heated sheet of steel in a mold under heavy pressure. Then it is coated with a porcelain-like, oven-baked finish. It is the same material seen in gas stoves. One particular characteristic of this material is that heavy impacts produce chipping of the finish that leave black oval or round dents.

tub refinihsing, Tile refinihsing, Sink refinihsing

Cultured Marble Reglazing

Cultured marble is a manmade, heavy, plastic, resinous material, that looks like natural stone but upon touching it you notice its temperature is not as cold or as warm as natural stone would be under similar circumstances. It tends to stay slightly warmer than the air in the room. If you knock on it, the sound it gives out is duller than natural stone, it almost sounds like wood.

Bathtub resurfacing, Tile resurfacing, Sink resurfacing

Acrylic Refinishing

This plastic resin material is more difficult to identify since its surface feels and looks like most finishes applied on fiberglass fixtures. With acrylic you can build thinner fixtures than with fiberglass BUT they are usually thicker! To identify it completely it is necessary to break, cut, or burn part of it. For our reglazing purposes we treat it as if it were fiberglass.

Bath refinihsing, Tile refinihsing, Sink refinihsing

Formica Reglazing

The material is a thin sheet of hard and heat-resistant plastic resin that is glued onto wood as a veneer. Formica is usually used on surfaces that get wet or need repetitive moist cleaning like on counter tops, vanities, tables, etc.

Bathtub Reglazing, Tile Reglazing, Sink Reglazing

Tile Refinishing

This ceramic product is the result of high-temperature-oven melting of special clays. The oven is also used to melt the porcelain-like surface finish which gives the tile its final color and texture.

Personalized & Free EStimate

Have Questions?
We have the answer and the solution.

(800) 833-8060or

contact us